- Русский
- English
Nexans LANmark-7A is a revolutionary concept in copper cabling technology, and follows closely behind the ratification of the international standard for Category 7A supporting frequencies up to 1000MHz. Designed for 40 Gigabit applications, it also supports existing RJ45 based legacy equipment using the revolutionary GG45 connector.
- Maximise energy efficiency
- double the bandwidth and half the crosstalk of Cat 6A
- 40 Gigabit capable
- fully backwards compatible
- easy migration to 40G simply by changing patch cords
- 360° screening for alien crosstalk immunity.
LANmark-7A Products
LANmark-7A GG45 Connector
International Designation LANmark-7A GG45- First RJ45-compatible Cat 7A connector using Nexans unique GG45 interface
- Able to support future 40Gigabit Ethernet application
- Able to provide Shannon Capacity of 50Gbps
- Full Class FA channel compliancy according to ISO11801 Amendment 1
- Fully screened for Alien Crosstalk Immunity
- ”2 in 1” Connector using 12 contacts to run 2 separate transmission modes
- Compatible with all Snap-In panels and outlets
Стандарты
- Международные EN 50173-1; IEC 60603-7-5; ISO/IEC 11801
Описание
LANmark-7A GG45 is a screened RJ45-compatible cable jack specified up to 1000MHz. It is designed specifically to support the high frequencies required for applications beyond 10 Gigabit Ethernet. Combined with LANmark7A Cable and Patch Cords, LANmark-7A GG45 has double the frequency range and half of the crosstalk compared to Cat6A and provides excellent transmission capacity up to 50Gbps (4-times of Cat6A). LANmark-7A GG45 uses 12 contacts: 8 contacts for the 1000MHz transmission (GG-mode) and 4 additional contacts to ensure RJ45 compatibility (RJ Mode). Thanks to its 360° screening and a fully closed rear cover, the connector allows excellent coupling attenuation and ensures immunity from alien crosstalk and other external interference. The LANmark-7A GG45 connector fits in all structural hardware designed for the Snap-In Connectors and can be used in all positions of a 4 connector twisted pair cabling channel (PP, CC, CP, TO).
Applications
- 10Base-T Ethernet
- 100Base-TX Fast Ethernet
- 1000Base-TX Gigabit Ethernet
- 10GBase-T 10 Gigabit Ethernet IEEE 802.3
- 155 Mbit ATM
- 1.2 Gbit ATM
- CATV up to 862MHz
- all future Cat 6A and Class EA applications
- all future Cat 7 and Class F applications
- all future Cat 7 and Class FA applications
Performance
The LANmark-7A GG45 12C Snap-In Connector is the first RJ45 compatible which meets the stringent requirements of Cat 7A up to 1000MHz. It has outstanding performance for Insertion Loss, Return Loss, NEXT/FEXT, Power Sum NEXT/FEXT, and especially Alien Crosstalk.
When used in combination with Nexans LANmark-7A cables and LANmark-7A patch cords, the four-connector channel meets Class FA requirements as defined in ISO/IEC11801 amendment 1.
Installation
The LANmark-7A GG45 12C Snap-In Connector makes use of Nexans wire organiser and is therefore very easy and fast to terminate. Using the Nexans patented Easy Termination Tool for GG45 the termination of GG45 is fool-proof and very reliable. A stranded version is available to allow the use of flexible stranded cable in cross connects or consolidation points.
- Fast termination with exclusive wire organizer
- Colour code : T568A &T568B
- 360° EMC protection
- Accepts solid wire from 22 to 24 AWG
- Stranded version available for consolidation point
- Snap-in format fits in all Nexans structural hardware
- 2 possibilities to terminate the drain wire : on the housing or on the rear cover
- Can be turned into keystone format using additional adapter
Guarantees
The LANmark-7A GG45 12C Snap-In Connector is covered by the guarantee as described in “The General Terms and Conditions of Sales”. When installed in combination with other LANmark-7A components, a 25 years channel warranty can be obtained, covering full Cat 7A/Class FA compliance.
| Electrical Performance LANmark-7A |
| Typical Data given for Worst Case 4-Connector Channel Configurations |
|
Attenuation |
NEXT pp |
ACR-F |
RL |
Coupling Att. |
PSANEXT |
PSAFEXT |
|||||||
Frequency |
(in dB) |
(in dB) |
(in dB) |
(in dB) |
(in dB) |
(in dB) |
(in dB) |
|||||||
(in MHz) |
Max |
Typical |
Min |
Typical |
Min |
Typical |
Min |
Typical |
Min |
Typical |
Min |
Typical |
Min |
Typical |
1 |
4.0 |
3.6 |
65.0 |
104.8 |
65.0 |
70.0 |
19.0 |
38.0 |
80.0 |
106.0 |
67.0 |
82.0 |
80.0 |
95.0 |
4 |
4.1 |
3.7 |
65.0 |
94.6 |
65.0 |
70.0 |
19.0 |
32.0 |
68.0 |
94.0 |
67.0 |
82.0 |
79.8 |
94.8 |
10 |
6.4 |
5.7 |
65.0 |
87.8 |
65.0 |
70.0 |
19.0 |
28.0 |
60.0 |
86.0 |
67.0 |
82.0 |
75.9 |
90.9 |
16 |
8.0 |
7.2 |
65.0 |
84.2 |
63.3 |
68.3 |
18.0 |
26.0 |
55.9 |
81.9 |
67.0 |
82.0 |
73.9 |
88.9 |
20 |
9.0 |
8.1 |
65.0 |
82.5 |
61.4 |
66.4 |
17.5 |
25.0 |
54.0 |
80.0 |
67.0 |
82.0 |
72.9 |
87.9 |
31.25 |
11.2 |
10.1 |
65.0 |
79.1 |
57.5 |
62.5 |
16.5 |
23.1 |
50.1 |
76.1 |
67.0 |
82.0 |
71.0 |
86.0 |
62.5 |
15.9 |
14.3 |
65.0 |
73.7 |
51.5 |
56.5 |
14.0 |
20.0 |
44.1 |
70.1 |
67.0 |
82.0 |
68.0 |
83.0 |
100 |
20.3 |
18.2 |
65.0 |
70.0 |
47.4 |
52.4 |
12.0 |
18.0 |
40.0 |
66.0 |
67.0 |
82.0 |
65.9 |
80.9 |
155 |
25.4 |
22.8 |
63.0 |
66.6 |
43.6 |
48.6 |
10.1 |
16.1 |
36.2 |
62.2 |
67.0 |
82.0 |
63.9 |
78.9 |
200 |
28.9 |
26.0 |
60.9 |
64.6 |
41.4 |
46.4 |
9.0 |
15.0 |
34.0 |
60.0 |
67.0 |
82.0 |
62.8 |
77.8 |
250 |
32.5 |
29.2 |
59.1 |
62.8 |
39.4 |
44.4 |
8.0 |
14.0 |
32.0 |
58.0 |
67.0 |
82.0 |
61.8 |
76.8 |
300 |
35.7 |
32.1 |
57.7 |
61.3 |
37.8 |
42.8 |
8.0 |
13.2 |
30.5 |
56.5 |
67.0 |
82.0 |
60.9 |
75.9 |
500 |
46.7 |
42.0 |
53.6 |
57.2 |
33.4 |
38.4 |
8.0 |
11.0 |
26.0 |
52.0 |
64.5 |
79.5 |
58.6 |
73.6 |
600 |
51.4 |
46.3 |
52.1 |
55.8 |
31.8 |
36.8 |
8.0 |
10.2 |
24.4 |
50.4 |
63.3 |
78.3 |
57.8 |
72.8 |
700 |
55.8 |
50.2 |
50.8 |
54.5 |
30.5 |
35.5 |
7.5 |
9.5 |
23.1 |
49.1 |
62.3 |
77.3 |
57.1 |
72.1 |
800 |
59.9 |
53.9 |
49.7 |
53.5 |
29.3 |
34.3 |
7.0 |
9.0 |
21.9 |
47.9 |
61.5 |
76.5 |
56.4 |
71.4 |
900 |
63.8 |
57.5 |
48.8 |
52.5 |
28.3 |
33.3 |
6.5 |
8.5 |
20.9 |
46.9 |
60.7 |
75.7 |
55.9 |
70.9 |
1000 |
67.6 |
60.8 |
47.9 |
51.6 |
27.4 |
32.4 |
6.0 |
8.0 |
20.0 |
46.0 |
60.0 |
75.0 |
55.4 |
70.4 |
| all values are specified at 20°C |
GG45 8C PCB jack
International Designation LANmark-7 GG45- Right angled Cat 7A PCB jack up to 1500 MHz
- to be used in active equipment or patch panels
- UL94-V0 plastic components
- RoHS compliant
- Wave solder compatible.
Стандарты
Международные ISO/IEC 11801
Описание
Please refer to the datasheet of N420.738 for more detailed information and performance tables.
LANmark-7A Cable
- Exceeds Category 7A in terms of ACR and Frequency Range
- Suitable for channels with capacity above 40GBps
- Superior Performance with positive ACR over the full frequency range
- Optimised for use with LANmark-7A GG45 connector
- Easy to install with Cat 7 connectivity through special foil construction
Стандарты
Международные EN 50173; EN 50288-4-1; ISO/IEC 11801; ISO/IEC 61156-5
Описание
LANmark-7A is a 4 pair S/FTP cable with individual pair foils and an overall braid offering superior performance up to 1200MHz. It is fully compliant with the new Category 7A standard and offers even large headroom above the Cat 7A requirement. Due to this excellent electrical performance and positive ACR up to 1000 / 1200MHz the cable is suited for transmission channels with a capacity of >40Gbps.
Application
LANmark-7A is the highest performing standardised cabling solution in the market and will support all current data applications and all planned applications using cabling up to Class FA (see discussions at IEEE about 40/100Gbps).
- All Ethernet applications including
- 10/100/1000Base-T
- 1000Base-TX
- 10GBase-T
- CaTV up to 862MHz
- Cable sharing applications including CATV
- Any future Class FA application
Installation
Ease of Installation is one of the main features of the LANmark-7A cable. Extra attention has been paid to ensure that the screen coverage is maintained and foils do not open during installation. The cable has been specially designed to be used in conjunction with the LANmark-7A GG45 12C connector.
LANmark-7A Patch Cord
International Designation LANmark-7A GG45 Patchcords- High bandwidth patch cord for 40 Gigabit applications and beyond
- Runs the GG45 '2in1' Connector in its high speed GG-Mode
- Both Sides use GG45 8 Contact Plugs up to 1000 MHz according IEC61076-3-110
- Allow full 4-connector Class FA channels
- Compatible with High Density requirements in Data Centres
Стандарты
Международные ISO/IEC 11801
Описание
Nexans LANmark-7A patch cords with GG45 8C non-switched plugs enable a GG45 7A permanent link to be used in 1000 MHz mode. The protruding part on the plug activates the switch within the GG45 7A “2in1” jack and terminates the none used contacts of RJ45 to ground. Using the contacts in the extreme outer corners of the RJ45 interface for transmission, excellent NEXT and Return Loss performances are achieved.
Nexans LANmark-7A patch cords maximise the full performance of the channel and will exceed the requirements of the ISO 4 connector model. This provides improved data throughput up to 1000 MHz and allows for the inclusion of additional patching or Consolidation Points for maximum system flexibility and all future data applications according ISO 11801.
- High Speed patch cords
- Screened
- 2 x GG45 8C 4-pair
Guarantees
- Reliable connections over the lifetime of the cabling system.
- Compatible with IEC 61076-3-110
- Compatible with Class F and Class FA standards (ISO 11801:2008)
Installation
- Look and Feel of a RJ45 plug (just using different contact positions)
- Self-latching, high reliability GG45 (IEC61076-3-110) screened connectors
- Sidebars on the plug avoid errors by using the patch cord for RJ45 jacks
- Low Smoke Halogen Free - Flame Retardant cable jacket
- Orange color, different colors available on request
- 1, 2, 3 and 5m lengths, others lengths available on request
| Electrical Performance LANmark-7A |
| Typical Data given for Worst Case 4-Connector Channel Configurations |
| Attenuation | NEXT pp | ACR-F | RL | Coupling Att. | PSANEXT | PSAFEXT | ||||||||
| Frequency | (in dB) | (in dB) | (in dB) | (in dB) | (in dB) | (in dB) | (in dB) | |||||||
| (in MHz) | Max | Typical | Min | Typical | Min | Typical | Min | Typical | Min | Typical | Min | Typical | Min | Typical |
| 1 | 4.0 | 3.6 | 65.0 | 104.8 | 65.0 | 70.0 | 19.0 | 38.0 | 80.0 | 106.0 | 67.0 | 82.0 | 80.0 | 95.0 |
| 4 | 4.1 | 3.7 | 65.0 | 94.6 | 65.0 | 70.0 | 19.0 | 32.0 | 68.0 | 94.0 | 67.0 | 82.0 | 79.8 | 94.8 |
| 10 | 6.4 | 5.7 | 65.0 | 87.8 | 65.0 | 70.0 | 19.0 | 28.0 | 60.0 | 86.0 | 67.0 | 82.0 | 75.9 | 90.9 |
| 16 | 8.0 | 7.2 | 65.0 | 84.2 | 63.3 | 68.3 | 18.0 | 26.0 | 55.9 | 81.9 | 67.0 | 82.0 | 73.9 | 88.9 |
| 20 | 9.0 | 8.1 | 65.0 | 82.5 | 61.4 | 66.4 | 17.5 | 25.0 | 54.0 | 80.0 | 67.0 | 82.0 | 72.9 | 87.9 |
| 31.25 | 11.2 | 10.1 | 65.0 | 79.1 | 57.5 | 62.5 | 16.5 | 23.1 | 50.1 | 76.1 | 67.0 | 82.0 | 71.0 | 86.0 |
| 62.5 | 15.9 | 14.3 | 65.0 | 73.7 | 51.5 | 56.5 | 14.0 | 20.0 | 44.1 | 70.1 | 67.0 | 82.0 | 68.0 | 83.0 |
| 100 | 20.3 | 18.2 | 65.0 | 70.0 | 47.4 | 52.4 | 12.0 | 18.0 | 40.0 | 66.0 | 67.0 | 82.0 | 65.9 | 80.9 |
| 155 | 25.4 | 22.8 | 63.0 | 66.6 | 43.6 | 48.6 | 10.1 | 16.1 | 36.2 | 62.2 | 67.0 | 82.0 | 63.9 | 78.9 |
| 200 | 28.9 | 26.0 | 60.9 | 64.6 | 41.4 | 46.4 | 9.0 | 15.0 | 34.0 | 60.0 | 67.0 | 82.0 | 62.8 | 77.8 |
| 250 | 32.5 | 29.2 | 59.1 | 62.8 | 39.4 | 44.4 | 8.0 | 14.0 | 32.0 | 58.0 | 67.0 | 82.0 | 61.8 | 76.8 |
| 300 | 35.7 | 32.1 | 57.7 | 61.3 | 37.8 | 42.8 | 8.0 | 13.2 | 30.5 | 56.5 | 67.0 | 82.0 | 60.9 | 75.9 |
| 500 | 46.7 | 42.0 | 53.6 | 57.2 | 33.4 | 38.4 | 8.0 | 11.0 | 26.0 | 52.0 | 64.5 | 79.5 | 58.6 | 73.6 |
| 600 | 51.4 | 46.3 | 52.1 | 55.8 | 31.8 | 36.8 | 8.0 | 10.2 | 24.4 | 50.4 | 63.3 | 78.3 | 57.8 | 72.8 |
| 700 | 55.8 | 50.2 | 50.8 | 54.5 | 30.5 | 35.5 | 7.5 | 9.5 | 23.1 | 49.1 | 62.3 | 77.3 | 57.1 | 72.1 |
| 800 | 59.9 | 53.9 | 49.7 | 53.5 | 29.3 | 34.3 | 7.0 | 9.0 | 21.9 | 47.9 | 61.5 | 76.5 | 56.4 | 71.4 |
| 900 | 63.8 | 57.5 | 48.8 | 52.5 | 28.3 | 33.3 | 6.5 | 8.5 | 20.9 | 46.9 | 60.7 | 75.7 | 55.9 | 70.9 |
| 1000 | 67.6 | 60.8 | 47.9 | 51.6 | 27.4 | 32.4 | 6.0 | 8.0 | 20.0 | 46.0 | 60.0 | 75.0 | 55.4 | 70.4 |