- Русский
- English
Модуль Nexans LANmark-6A был признан независимой лабораторий Delta, как первый в мире экранированный модуль, превышающий требования наиболее требовательного для категории 6А на сегодня стандарта – IEC 60603-7-51.
Лучший на рынке
Это позволяет высокопроизводительной кабельной системе Nexans LANmark-6A обеспечивать:
- гарантированный высокий запас по отношению к стандартам для:
- NEXT (2дБ);
- Return Loss (2дБ);
- Alien Crosstalk (15дБ) (не требуется дорогостоящее оборудование для измерения уровня перекрестных межкабельных наводок);
- отсутствие результатов " pass* ";
- Возможность монтажа линий малой длины для Центров Обработки Данных (ЦОД).
Новая кабельная система Nexans LANmark-6A позволяет организовать короткие линии длиной до 10м при модели на 3х соединителях. Это делает ее идеальным решением для современных Центров Обработки Данных (ЦОД) при построении которых IT-специалисты уже столкнулись с проблемой ограниченного пространства и где, согласно стандартам, они должны монтировать каналы связи длиной не меньше 24м (при использовании наиболее распространенной в ЦОДах модели канала на 3х соединителях). При уменьшении минимальной длины канала связи, в ЦОДах более не потребуется прокладывать излишний кабель, что уменьшит стоимость проекта и позволит оптимально использовать пространство ЦОДа.
Детально о продуктах
Модули LANmark-6A snap-in
- High bandwidth RJ45 connector to support 10Gigabit Ethernet
- Fully complies to TIA and ISO Cat 6A cabling standards
- Supports extremely short Cat 6A channel configurations needed for datacenters
- Fully screened for alien crosstalk immunity
- Compatible with all Snap-In panels and outlets
- международные: EN 50173-1; EN 50173-3; IEC 60603-7-5; IEC 60603-7-51; ISO/IEC 11801:2002/A2:2008; ISO/IEC 24764; ISO11801:2002/A1:2008
- национальные: ANSI/TIA-568-C.2
Описание
LANmark-6A EVO Snap-In Connector is a screened RJ45 cable jack specified up to 500MHz. It is designed specifically to support the high frequencies required for 10 Gigabit Ethernet, but is also fully backwards-compatible with lower frequency applications using the RJ45 interface. LANmark-6A EVO uses a fully closed rear cover, which provides 360° screening and excellent coupling attenuation to ensure immunity from alien crosstalk and other external interference. Cabling channels with LANmark-6A cable jack have not to be verified on site for Alien Crosstalk, as this new 10G parameter is met by design. This reduces significantly the cost for 10G networking.
- 10Base-T Ethernet
- 100Base-TX Fast Ethernet
- 1000Base-TX Gigabit Ethernet
- 10GBase-T 10 Gigabit Ethernet IEEE 802.3
- 155 Mbit ATM
- 1.2 Gbit ATM
- all future Cat 6A and Class EA applications
The LANmark-6A EVO has outstanding electrical performance up to 500MHz especially for NEXT/FEXT, Power Sum NEXT/FEXT, Return Loss and all screening parameters. This enables to achieve high performing Cat 6A channels as well as very short link and channel configurations needed in data centres with up to 3 connection points within 12 meters.
Installation
LANmark-6A EVO makes use of Nexans wire organiser and is therefore very easy and fast to terminate. Using the Nexans comfort tool installation tool EVO Snap-In series is re-usable. A stranded version is available to allow the use of flexible stranded cable in cross connects or consolidation point.
The LANmark-6A EVO fits in all structural hardware designed for the EVO Snap-In range and can used in all positions of a 4 connector twisted pair cabling channel (PP, CC, CP, TO).
- Fast termination with exclusive wire organizer and hinging metal EMC rear cover
- Colour code : T568A &T568B
- 360° EMC protection
- Re-usable with universal comfort tool
- Accepts solid wire from 22 to 24 AWG
- Stranded version available for consolidation point
- Snap-in format fits in all Nexans structural hardware
- 2 possibilities to terminate the drain wire : on the housing or on the rear cover
- Can be turned into keystone format using an additional adapter
When installed in combination with other LANmark-6A components, a 25 years channel warranty can be obtained, covering full 10GBase-T support and full Cat 6A/Class EA compliance
| Electrical Performance LANmark-6A 4 Connector Channel Part 1 |
| "All values are based on Worst Case 4 Connector Channel configurations according ISO11801:2008 AM1 Minimal and maximum values represent guaranteed channel performance" |
|
Attn |
NEXT |
PSNEXT |
ACR-F |
||||||
Freq |
in dB |
in dB |
in dB |
in dB |
||||||
in MHz |
Max |
Typ |
Std |
Min |
Typ |
Std |
Min |
Typ |
Std |
Typ |
1 |
<4 |
4.0 |
65.0 |
67.0 |
85.0 |
62.0 |
64.0 |
74.8 |
63.3 |
69.9 |
4 |
4.1 |
4.1 |
63.0 |
65.0 |
72.9 |
60.5 |
62.5 |
65.0 |
51.2 |
57.9 |
10 |
6.4 |
6.3 |
56.6 |
58.6 |
65.0 |
54.0 |
56.0 |
58.5 |
43.3 |
49.9 |
16 |
8.1 |
8.0 |
53.2 |
55.2 |
60.9 |
50.6 |
52.6 |
55.1 |
39.2 |
45.9 |
20 |
9.1 |
9.0 |
51.6 |
53.6 |
59.0 |
49.0 |
51.0 |
53.5 |
37.2 |
43.9 |
31.25 |
11.4 |
11.2 |
48.4 |
50.4 |
55.1 |
45.7 |
47.7 |
50.2 |
33.4 |
40.0 |
62.5 |
16.3 |
15.9 |
43.4 |
45.4 |
49.1 |
40.6 |
42.6 |
45.1 |
27.3 |
34.0 |
100 |
20.8 |
20.2 |
39.9 |
41.9 |
45.0 |
37.1 |
39.1 |
41.6 |
23.3 |
29.9 |
155 |
26.2 |
25.4 |
36.7 |
38.7 |
41.2 |
33.8 |
35.8 |
38.3 |
19.5 |
26.1 |
200 |
30.0 |
28.9 |
34.8 |
36.8 |
39.0 |
31.9 |
33.9 |
36.4 |
17.2 |
23.9 |
250 |
33.8 |
32.5 |
33.1 |
35.1 |
37.0 |
30.2 |
32.2 |
34.7 |
15.3 |
22.0 |
300 |
37.3 |
35.7 |
31.7 |
33.7 |
35.4 |
28.8 |
30.8 |
33.3 |
13.7 |
20.4 |
500 |
49.3 |
46.7 |
27.9 |
29.9 |
31.0 |
24.8 |
26.8 |
24.9 |
9.3 |
16.0 |
| *Standard values based on ISO11801:2002/A1:2008 ClassEA |
| Electrical Performance LANmark-6A 4 Connector Channel Part 2 |
| All values are based on Worst Case 4 Connector Channel configurations according ISO11801:2008 AM1 Minimal and maximum values represent guaranteed channel performance |
|
PS ACR-F |
PS ANEXT |
PS AACR-F |
RL |
|||||||
Freq |
in dB |
in dB |
in dB |
in dB |
|||||||
in MHz |
Std |
Typ |
Std |
Min |
Typ |
Std |
Min |
Typ |
Std |
Min |
Typ |
1 |
60.3 |
66.9 |
80.0 |
90.0 |
92.0 |
77.0 |
92.0 |
94.0 |
19.0 |
21.0 |
21.0 |
4 |
48.2 |
54.9 |
74.0 |
89.0 |
91.0 |
65.0 |
80.0 |
82.0 |
19.0 |
21.0 |
32.0 |
10 |
40.3 |
46.9 |
70.0 |
85.0 |
87.0 |
57.0 |
72.0 |
74.0 |
19.0 |
21.0 |
28.0 |
16 |
36.2 |
42.9 |
68.0 |
83.0 |
85.0 |
52.9 |
67.9 |
69.9 |
18.0 |
20.0 |
26.0 |
20 |
34.2 |
40.9 |
67.0 |
82.0 |
84.0 |
51.0 |
66.0 |
68.0 |
17.5 |
19.5 |
25.0 |
31.25 |
30.4 |
37.0 |
65.1 |
80.1 |
82.1 |
47.1 |
62.1 |
64.1 |
16.5 |
18.5 |
23.1 |
62.5 |
24.3 |
31.0 |
62.0 |
77.0 |
79.0 |
41.1 |
56.1 |
58.1 |
14.0 |
16.0 |
20.0 |
100 |
20.3 |
26.9 |
60.0 |
75.0 |
77.0 |
37.0 |
52.0 |
54.0 |
12.0 |
14.0 |
18.0 |
155 |
16.5 |
23.1 |
57.1 |
72.1 |
74.1 |
33.2 |
48.2 |
50.2 |
10.1 |
12.1 |
16.1 |
200 |
14.2 |
20.9 |
55.5 |
70.5 |
72.5 |
31.0 |
46.0 |
48.0 |
9.0 |
11.0 |
15.0 |
250 |
12.3 |
19.0 |
54.0 |
69.0 |
71.0 |
29.0 |
44.0 |
46.0 |
8.0 |
10.0 |
14.0 |
300 |
10.7 |
17.4 |
52.8 |
67.8 |
69.8 |
27.5 |
42.5 |
44.5 |
8.0 |
10.0 |
13.2 |
500 |
6.3 |
13.0 |
49.5 |
64.5 |
66.5 |
23.0 |
38.0 |
40.0 |
8.0 |
10.0 |
11.0 |
| *Standard values based on ISO11801:2002/A1:2008 ClassEA |
Кабель LANmark-6A
- Ideal Cable for 10GBase-T application
- Complies fully with new standards for Category 6A and Class EA
- Small diameter
- Guaranteed performance up to 500MHz
- Fully screened for alien crosstalk immunity
- международные: EN 50288-4-1; IEC 61156-5; IEEE 802.3an; ISO/IEC 11801:2002/A2:2008; ISO/IEC 24764; ISO/IEC TR24750; ISO11801:2002/A1:2008
- национальные: ANSI/TIA-568-C.2; TIA/EIA TSB-155
Описание
LANmark-6A cable is the ideal solution for a 10 Gigabit Ethernet network. The range consists of cables which have been designed specifically to support the higher frequencies required for 10 Gigabit Ethernet, while maintain to be fully backwards compatible with today's needs. All LANmark-6A products are screened cables to ensure immunity from Alien Crosstalk and other external interference and are specified up to frequencies of 500MHz.
- 10Base-T Ethernet
- 100Base-TX Fast Ethernet
- 1000Base-TX Gigabit Ethernet
- 10GBase-T 10 Gigabit Ethernet IEEE 802.3
- 155 Mbit ATM
- 1.2 Gbit ATM
- future Cat 6A and Class EA applications
With guaranteed performance to 500MHz, Nexans LANmark-6A cables provide guaranteed headroom and bandwidth over and above the Category 6A requirements of international, european and american cable standards, including of IEC 61156-5, EN 50173, EN 50288, TIA/EIA 568-B.2-1 Ad.10. When used in combination with Nexans LANmark-6A Evo connectors and LANmark-6A Ultim patch cords, the system supports the 10GBase-T applications as defined in IEEE 802.3an, and the full 100m four-connector links and channels meet Category 6A and Class EA requirements as defined in TIA/EIA568B.2 Addendum 10 and ISO/IEC11801 2002/A1:2008.
Installation
The LANmark-6A cables have the advantage of offering equal dimensions and flexibility as the equivalent LANmark-6 screened cables with the same ease of installation and termination.
Guarantees
Nexans LANmark-6A 10G cable is covered by a parts and labour warranty as described in the Nexans Certified System Warranty. When installed in combination with other LANmark-6A 10G components, a 25 year channel warranty can be obtained.
| Electrical Performance LANmark-6A 10G F1UTP cable |
|
Attn |
NEXT |
PSNEXT |
ACR-F |
PS ACR-F |
PS ANEXT |
PS AACR-F |
RL |
||||||||
Freq |
in dB |
in dB |
in dB |
in dB |
in dB |
in dB |
in dB |
in dB |
||||||||
in MHz |
Max. |
Typ. |
Min. |
Typ. |
Min. |
Typ. |
Min. |
Typ. |
Min. |
Typ. |
Min. |
Typ. |
Min. |
Typ. |
Min. |
Typ. |
1 |
2.1 |
2.1 |
74.3 |
79.3 |
72.3 |
77.3 |
67.8 |
92.8 |
64.8 |
>60 |
67.0 |
90.0 |
67.0 |
87.9 |
20.0 |
26.0 |
4 |
3.8 |
3.8 |
65.3 |
70.3 |
63.3 |
68.3 |
55.8 |
80.8 |
52.8 |
57.2 |
67.0 |
90.0 |
66.2 |
75.9 |
23.0 |
29.0 |
10 |
5.9 |
5.9 |
59.3 |
64.3 |
57.3 |
62.3 |
47.8 |
72.8 |
44.8 |
49.3 |
67.0 |
87.0 |
58.2 |
67.9 |
25.0 |
31.0 |
16 |
7.5 |
7.5 |
56.2 |
61.2 |
54.2 |
59.2 |
43.7 |
68.7 |
40.7 |
45.2 |
67.0 |
85.0 |
54.1 |
63.8 |
25.0 |
31.0 |
20 |
8.4 |
8.4 |
54.8 |
59.8 |
52.8 |
57.8 |
41.8 |
66.8 |
38.8 |
43.2 |
67.0 |
84.0 |
52.2 |
61.9 |
25.0 |
31.0 |
31.25 |
10.5 |
10.5 |
51.9 |
56.9 |
49.9 |
54.9 |
37.9 |
62.9 |
34.9 |
39.4 |
67.0 |
82.1 |
48.3 |
58.0 |
23.6 |
29.6 |
62.5 |
15.0 |
15.0 |
47.4 |
52.4 |
45.4 |
50.4 |
31.9 |
56.9 |
28.9 |
33.3 |
65.6 |
79.0 |
42.3 |
52.0 |
21.5 |
27.5 |
100 |
19.1 |
19.1 |
44.3 |
49.3 |
42.3 |
47.3 |
27.8 |
52.8 |
24.8 |
29.3 |
62.5 |
77.0 |
38.2 |
47.9 |
20.1 |
26.1 |
155 |
24.1 |
24.1 |
41.4 |
46.4 |
39.4 |
44.4 |
24.0 |
49.0 |
21.0 |
25.5 |
59.6 |
74.1 |
34.4 |
44.1 |
18.8 |
24.8 |
200 |
27.6 |
27.6 |
39.8 |
44.8 |
37.8 |
42.8 |
21.8 |
46.8 |
18.8 |
23.2 |
58.0 |
72.5 |
32.2 |
41.9 |
18.0 |
24.0 |
250 |
31.1 |
31.1 |
38.3 |
43.3 |
36.3 |
41.3 |
19.8 |
44.8 |
16.8 |
21.3 |
56.5 |
71.0 |
30.2 |
39.9 |
17.3 |
23.3 |
300 |
34.3 |
34.3 |
37.1 |
42.1 |
35.1 |
40.1 |
18.3 |
43.3 |
15.3 |
19.7 |
55.3 |
69.8 |
28.7 |
38.4 |
16.8 |
22.8 |
500 |
45.3 |
45.3 |
33.8 |
38.8 |
31.8 |
36.8 |
13.8 |
38.8 |
10.8 |
15.3 |
52.0 |
66.5 |
24.2 |
33.9 |
15.2 |
21.2 |
| all values are specified at 20°C |
Комм. шнуры LANmark-6A
- High speed RJ45 patch cord to run 10GBase-T
- Frequency range up to 500MHz
- Complies to Cat 6A in as defined in TIA568B.2-10
- Fully screened for Alien Crosstalk immunity
- Uses Nexans stranded U/FTP cable technology
- международные: IEEE 802.3an; ISO/IEC 24764; ISO/IEC TR24750; ISO11801:2002/A1:2008
- национальные: ANSI/TIA-568-C.2; TIA/EIA TSB-155
Описание
LANmark-6A Ultim cords are developed to support the 10 Gigabit Ethernet application (IEEE 802.3an), offer superior performance up to 500MHz and exceed the Category 6A requirements. They provide improved data throughput and allow for the inclusion of Cross-Connects or Consolidation Points into the channel configuration. Ultim cords use stranded cable and as such provide maximum system flexibility at CC and CP. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6A Ultim cords can also be used for accurate field testing of Cat 6A cabling channels due to their mechanical stability.
Performance
The LANmark-6A Ultim cords fully comply and exceed the requirements of EIA/TIA-568-B.2-10 and enable to achieve high performing Cat 6A channels. Used with other LANmark-6A components, very short Cat 6A link and channel configurations with up to 3 connection points within 10 meters can be supported.
Guarantees
When installed in combination with other LANmark-6A components, a 25 years channel warranty can be obtained, covering full 10GBase-T support and full Cat 6A/Class EA compliance.
Installation
- The cords are by design fully Alien Crosstalk compliant as in IEEE 802.3an so no special installation rules need to be taken into account for ANEXT and AFEXT compliance.
- 1, 2, 3 and 5m are standard lengths; other lengths are available on demand.
- 10 m is standard length for single-end patchcord; other lengths are available on demand.
- Orange and Dark Grey are standard colors; other colors are available on demand.
- Dark Grey is the standard boot color; others boot colors are available on demand.
- Rugged construction: external strain relief.
| Electrical Performance LANmark-6A 4 Connector Channel Part 1 |
| "All values are based on Worst Case 4 Connector Channel configurations according ISO11801:2008 AM1 Minimal and maximum values represent guaranteed channel performance" |
|
Attn |
NEXT |
PSNEXT |
ACR-F |
||||||
Freq |
in dB |
in dB |
in dB |
in dB |
||||||
in MHz |
Max |
Typ |
Std |
Min |
Typ |
Std |
Min |
Typ |
Std |
Typ |
1 |
<4 |
4.0 |
65.0 |
67.0 |
85.0 |
62.0 |
64.0 |
74.8 |
63.3 |
69.9 |
4 |
4.1 |
4.1 |
63.0 |
65.0 |
72.9 |
60.5 |
62.5 |
65.0 |
51.2 |
57.9 |
10 |
6.4 |
6.3 |
56.6 |
58.6 |
65.0 |
54.0 |
56.0 |
58.5 |
43.3 |
49.9 |
16 |
8.1 |
8.0 |
53.2 |
55.2 |
60.9 |
50.6 |
52.6 |
55.1 |
39.2 |
45.9 |
20 |
9.1 |
9.0 |
51.6 |
53.6 |
59.0 |
49.0 |
51.0 |
53.5 |
37.2 |
43.9 |
31.25 |
11.4 |
11.2 |
48.4 |
50.4 |
55.1 |
45.7 |
47.7 |
50.2 |
33.4 |
40.0 |
62.5 |
16.3 |
15.9 |
43.4 |
45.4 |
49.1 |
40.6 |
42.6 |
45.1 |
27.3 |
34.0 |
100 |
20.8 |
20.2 |
39.9 |
41.9 |
45.0 |
37.1 |
39.1 |
41.6 |
23.3 |
29.9 |
155 |
26.2 |
25.4 |
36.7 |
38.7 |
41.2 |
33.8 |
35.8 |
38.3 |
19.5 |
26.1 |
200 |
30.0 |
28.9 |
34.8 |
36.8 |
39.0 |
31.9 |
33.9 |
36.4 |
17.2 |
23.9 |
250 |
33.8 |
32.5 |
33.1 |
35.1 |
37.0 |
30.2 |
32.2 |
34.7 |
15.3 |
22.0 |
300 |
37.3 |
35.7 |
31.7 |
33.7 |
35.4 |
28.8 |
30.8 |
33.3 |
13.7 |
20.4 |
500 |
49.3 |
46.7 |
27.9 |
29.9 |
31.0 |
24.8 |
26.8 |
24.9 |
9.3 |
16.0 |
| *Standard values based on ISO11801:2002/A1:2008 ClassEA |